1. Hydraulic hoses are mainly used as civilian shower hoses, with inner diameters ranging from 3mm to 150mm. Small-diameter hoses with an inner diameter of 3mm-25mm are mainly used for precision optical circuit protection. 2. The hoses are mainly divided into: threading hoses, drainage hoses, ventilation hoses, shower hoses and wire harness pipes according to their purposes; according to materials, they are mainly d...
More details
Since the hydraulic hose joint is a detachable connection element, it not only meets the requirements of normal connection stability, strong sealing, reasonable size, small pressure loss, good process performance, etc., but also needs to meet the requirements of convenient disassembly and assembly. Require. Therefore, don't underestimate the small pipe joints, because as long as it exists, it can support the existenc...
More details
(1). The hose joint cannot be bent excessively or at the root when it is moving or stationary, at least at 1.5 times its diameter. (2). When the hose moves to the extreme position, it should not be pulled too tight, it should be relatively loose. (3). Try to avoid torsional deformation of the hose. (4). The hose should be kept away from the heat radiation components as much as possible, and a heat shield should be...
More details
In the hydraulic system, whether it is a metal pipe joint or a hose joint, there is a problem of easy leakage. For ferrule type pipe joints, most of the pipes are subjected to a large external force or impact force, which causes the ferrule to be loose or the end face of the pipe is deformed to cause leakage. It is in good condition and the compression degree of the ferrule nut, etc., and also eliminates the external...
More details
Installation steps of tube fittings: (1) According to the requirements of Chapter 9, the pipes that need to be pickled should be pickled first. (2) Cut the pipe with sawing machine or special pipe cutting machine and other equipment according to the required length. It is absolutely not allowed to use melting (such as flame cutting) or grinding wheel cutting; remove the inner and outer burrs, metal chips and dirt on...
More details
Hose is an important part in modern industry. Hose is mainly used as wire, cable, wire and cable protection tube of automation instrument signal and civil shower hose, with specifications ranging from 3mm to 150mm. Let's talk about the common types of metal hose joints? 1. External threaded joint: mainly used for the connection between the local junction box and the hose. Open a hole in the local box, insert the conn...
More detailsQR Code
English
中文简体
Español
