English
中文简体
Español
Precautions for installation of high pressure hose joints
Author:admin Date:2022-08-04
(1). The hose joint cannot be bent excessively or at the root when it is moving or stationary, at least at 1.5 times its diameter.
(2). When the hose moves to the extreme position, it should not be pulled too tight, it should be relatively loose.
(3). Try to avoid torsional deformation of the hose.
(4). The hose should be kept away from the heat radiation components as much as possible, and a heat shield should be installed if necessary.
(5). External damage to the hose should be avoided, such as long-term friction on the surface of the same component during use.
(6). If the weight of the hose causes excessive deformation, there should be a support.
