Industry News

  • What is the best material for hydraulic seals?

    Update: 10 11 22

    What is the best material for hydraulic seals?

    The materials of hydraulic sealing ring are rubber, tetrafluoroethylene, aluminum, copper, steel, etc. Different materials are used in different situations, rubber and tetrafluoro materials are encouraged, aluminum and copper materials are used for pressure, and steel materials must be used for UHV. The installation precautions of hydraulic seals are as follows: 1. Inspect the piston, cylinder barrel and related sur...

    More details
  • Thread grade and size of the threads of hose fittings

    Update: 03 11 22

    Thread grade and size of the threads of hose fittings

    1. Grades: The threads of hose fittings specify six different grades, namely 1A, 2A, 3A (external thread) and 1B, 2B, 3B (internal thread). The suffix A and B refer to the external thread and the internal thread respectively. 2. Threads of grades 1A and 1B are specified for weapons and equipment and some special use requirements, that is, they can be used in situations that require easy and rapid assembly or where t...

    More details
  • How to prevent leakage of hose joints

    Update: 24 10 22

    How to prevent leakage of hose joints

    You must know that both metal joints and hose joints are very prone to leakage problems. In most cases, the ferrules are loosened or deformed due to the large external force or impact force on the pipeline. Therefore, we need to check the card frequently. Whether the sleeve is out of round and whether the cutting edge is worn, if the pipe end and the ferrule nut are not pressed tightly, the external force of the pipe...

    More details
  • How to install hydraulic hose joints to ensure good air tightness

    Update: 20 10 22

    How to install hydraulic hose joints to ensure good air tightness

    The installation of hydraulic fittings is generally divided into the following 5 steps: 1. Pre-installed ①. An important part of the pre-installation of hydraulic joints and fittings directly affects the reliability of the seal. Usually a dedicated preprocessor is required. Fittings with small diameters can be pre-assembled in a vise. The specific method is to use a joint as the mother body, and press the nut and th...

    More details
  • What is the difference between hydraulic fittings and ordinary fittings

    Update: 13 10 22

    What is the difference between hydraulic fittings and ordinary fittings

    Hydraulic pipe fittings are used in hydraulic systems. Most of the leakage problems in hydraulic systems occur in pipe fittings. Therefore, the selection of pipe fittings is very important. Standard hydraulic pipe fittings should meet the requirements of easy assembly and disassembly, firm connection, reliable sealing, small size, Large flow capacity, small pressure drop, good manufacturability and other requirements...

    More details
  • How to seal the hydraulic hose connection with the hose?

    Update: 08 10 22

    How to seal the hydraulic hose connection with the hose?

    Many people will learn about other equipment after buying a hydraulic hose joint. Many people want to know how the hydraulic hose joint is connected and sealed with the hose? 1. Sealing method for connecting hydraulic hose joints and hoses - the inner and outer threads of the quick connector can only be connected to the hose after using transition joints or adapters. 2. The connection and sealing method of hydrauli...

    More details

LOOKING FOR A PROFESSIONAL &
RELIABLE ELECTRIC MOTOR MANUFACTURER?